AquaFX Hammer Head RO/DI Systerm

Write a Review

Your Price: $418.95

Questions about this item? Be the first to ask here.

Part Number: 353

Quantity

Description

Hammer Head Unique Features

- Booster Pump with High/Low Pressure Sensors for optimized performance & efficiency
- Auto Flush RO Controller for 1:1 Waste Water Ratio
- Compact Steel Bracket
- Adjustable Flow Restrictor
- Glycerin-Filled Pressure Gauge

AquaFX RO/DI Features

- Hand-built in the USA by AquaFX!
- 0 TDS Water! Zero Phosphate, Ultra Pure Laboratory Grade Water Purifier
- Remove Harmful Impurities from Your Water
- Heavy Duty Steel Bracket
- Quick-Disconnect Fittings (¼" OD)

The AquaFX HammerHead Boosted RO/DI System is a new competitor to the food chain. It has all the great features of the Octopus but with a lower price point. The differences include a compact steel bracket, rather than AquaFX traditional solid aluminum bracket. The bracket over all length (side to side) is more compact compared with the AquaFX Octopus but is deeper to accommodate all the bells and whistles. The Hammer Head is feed from the right side of the unit.

The Auto Flush Controller not only extends RO Membrane life and avoid TDS Creep to extend DI Cartridge Life automatically, it also works together with the Boost Pump and the Adjustable Flow Restrictor to allow you to achieve a 1:1 Product-to-Waste Water Ratio. The automatic flush at start up helps to eliminate TDS Creep and extends DI life. The automatic flush at shut down helps to prevent RO membrane scaling. The Auto Flush Controller also features a built-in TDS meter to allow you to monitor system performance.

Specifications

- 4-Stage Filtration

- Stage 1 - AquaFX Premium 1-micron Sediment Filter
- Stage 2 - AquaFX Chlorine Guzzler Carbon Block Pre-filter
- Stage 3 - AquaFX TFC RO Membrane (made in the USA)
- Stage 4 - AquaFX Mixed Bed Color Indicating Zero TDS DI resin (USA Resin)

- Glycerin-Filled Pressure Gauge
- Quick Connect Fittings
- 10" Canister Filter Wrench for easy filter changes
- Heavy Duty Compact Steel Mounting Bracket

Includes

- HammerHead RO/DI Filter and cartridges
- 1/4" Hose Bib Adapter (additional installation parts available here)
- 10" Canister Filter Wrench for easy filter changes
- 6 feet of supply tube, drain tube and product tube
- AquaFX Instruction manual
- You can add 100 GPD anytime by adding a PiggyBack Kit

* Output based on 65PSI, 77°F, 250ppm TDS water input over a 24-hour period. Lower pressure, cooler water temperature or higher TDS will reduce output. A booster pump is highly recommended if pressure is below 45 PSI.

419 points will be rewarded to you when you buy this item.