The Whale Shark takes water purification to another level. With seven stages of filtration, the Whale Shark produces the purist water for your reef aquarium. Three dedicated Deionization stages (Cation, Anion & Mix-Bed) captures every bit of impurity that may be in the water while allowing you to replace each individual DI resin separately. Water is prefiltered by a sediment filter and two Chloramine Blaster Carbon filters before being filtered by our True 1:1 RO Membrane. Our True 1:1 RO membrane saves you a ton of waste water while maintain the same high-rejection properties. Additional features include a manual flush kit and a ASO valve for convenient operation.
Whale Shark Unique Features - AquaFX True 1:1 RO Membrane
- Three DI Cartridges - Cation, Anion & Mix-Bed - Double Chloramine Blaster Carbon filters - ASO (Auto Shut Off) Kit - Triple TDS Meter with Backlit Display - Manual Flush Kit - Heavy Duty Aluminum Bracket
- Dimensions: 15.5"W x 7.25"D x 15.5"H (18"H for 200GPD System) and 15.5"W x 7.25"D x 12.5"H
Features
- Hand-built in the USA by AquaFX!
- 0 TDS Water! Zero Phosphate, Ultra Pure Laboratory Grade Water Purifier
- Remove Harmful Impurities from Your Water
- Heavy Duty Aluminum Bracket
- Quick-Disconnect Fittings (¼" OD)
Specifications
- 7-Stage Filtration
- Stage 1 - AquaFX Premium 1-micron Sediment Filter
- Stage 2 - AquaFX Chloramine Blaster Carbon Pre-filter
- Stage 3 - AquaFX Chloramine Blaster Carbon Pre-filter
- Stage 4 - AquaFX TFC True 1:1 RO Membrane (made in the USA)
- Stage 5 - AquaFX Cation DI Filter (USA Resin)
- Stage 6 - AquaFX Anion DI Filter (USA Resin)
- Stage 7 - AquaFX Mixed Bed Color Indicating Zero TDS DI resin (USA Resin)
- Pressure Gauge
- Quick Connect Fittings
- 10" Canister Filter Wrench for easy filter changes
- Heavy Duty Aluminum Mounting Bracket
Includes
- Whale Shark RO/DI Filter and cartridges
- 1/4" Hose Bib Adapter (additional installation parts available here)
- 6 feet of supply tube, drain tube and product tube
- AquaFX Instruction manual
- Available in 100GPD and 200GPD. You can add 100 GPD anytime by adding a PiggyBack Kit
* Output based on 65PSI, 77°F, 250ppm TDS water input over a 24-hour period. Lower pressure, cooler water temperature or higher TDS will reduce output. A booster pump is highly recommended if pressure is below 45 PSI.
